Тема firmware philips 32pfl3008h/12 vers. 2.2 —

  • Мнения: 8
  • Благодарности: 0
  • Точки: 9.00

firmware philips 32pfl3008h/12 vers. 2.2 — е тема създадена от Alberobello853.

#
firmware philips 32pfl3008h/12 vers. 2.2 —
Alberobello853.

2017-06-26 17:42

Good day, I'm Vincenzo Alberobello853. , I'm new to the site, I still do not know how to behave. I would like to make a request if I can, look for the firmware of the PHILIPS 32PFL3008H / 12 VERS.2.2 and IA TV. The blue tv in question with blue logo. Certainly I want to join a firmware contribution. Thank you.
13:11, 27 юни 2017 г. #1

Моля използвайте формата за Вход или Регистрация, за да се присъедините към беседата.

  • Мнения: 1476
  • Благодарности: 146
  • Точки: 22549.00
  • Gold Medal Silver Medal Bronze Medal

Отговор от ciklon в темата firmware philips 32pfl3008h/12 vers. 2.2 —

Hello, Alberobello853

The site has 2 dumps for this TV model, which you can download if you have the required number of points.
- www.ciklon.org/en/downloads/viewdownload...h-chassis-ves2-2e-la
- www.ciklon.org/en/downloads/viewdownload...hilips-32pfl3008h-12
You can download software update from here: www.p4c.philips.com/cgi-bin/dcbint/cpind...no&ctn=32PFL3008H/12

Best Regards
- "Разни хора, разни идеали..." - Алеко Константинов
- "Аз знам, че нищо не знам" - Сократ

www.ciklon.org
14:32, 27 юни 2017 г. #2

Моля използвайте формата за Вход или Регистрация, за да се присъедините към беседата.

  • Мнения: 8
  • Благодарности: 0
  • Точки: 9.00

Отговор от Alberobello853. в темата firmware philips 32pfl3008h/12 vers. 2.2 —

Thanks for the answer, I've tried all this, maybe wrong, I downloaded the file directly from the PHILIPS site, but the TV does not load the software, with the remote command OK, until the LED blinks, it should load The file, but nothing happens. I remind you of the default, blue screen with frozen PHILIPS logo. What news ?. Thank you
17:43, 29 юни 2017 г. #3

Моля използвайте формата за Вход или Регистрация, за да се присъедините към беседата.

  • Мнения: 9
  • Благодарности: 0
  • Точки: 52.00

Отговор от Faber в темата firmware philips 32pfl3008h/12 vers. 2.2 —

Hi, it's probably the firmware, what you have installed is not for that frame
15:41, 2 юли 2017 г. #4

Моля използвайте формата за Вход или Регистрация, за да се присъедините към беседата.

  • Мнения: 8
  • Благодарности: 0
  • Точки: 9.00

Отговор от Alberobello853. в темата firmware philips 32pfl3008h/12 vers. 2.2 —

Thanks for the reply, but I think the file is that. 32 PFL3008H / Vers 2.2E LA, if I'm wrong, right. Thank you.
12:06, 6 юли 2017 г. #5

Моля използвайте формата за Вход или Регистрация, за да се присъедините към беседата.

  • Мнения: 894
  • Благодарности: 136
  • Точки: 2735.00
  • Gold Medal Silver Medal Bronze Medal

Отговор от dtmf75 в темата firmware philips 32pfl3008h/12 vers. 2.2 —

This is not Philips, but Turkish Vestel TV.
Do you have nand programmer or skils for linux uart commands?
23:05, 6 юли 2017 г. #6

Моля използвайте формата за Вход или Регистрация, за да се присъедините към беседата.

  • Мнения: 8
  • Благодарности: 0
  • Точки: 9.00

Отговор от Alberobello853. в темата firmware philips 32pfl3008h/12 vers. 2.2 —

Good day, I know the card and vestel (17mb95s-1), I was referring to Philips TV. I have 3 programmers, one and RT809 SERIAL ISP PROGRAMMER, then WILLEM EPROM PROGRAMMER, and another and EZP2013 PROGRAMMER, I do not use the LINUX interface. I would like to remind you that I am a fan of electronics.thank you
13:54, 7 юли 2017 г. #7

Моля използвайте формата за Вход или Регистрация, за да се присъедините към беседата.

Създадено с Kunena форум